Minolta PI4700E user manual Collate, Sorting, Orientation

Paper tab 4

(4)Collate

Use this function when making multiple sets of prints of the same document, to spec- ify whether or not to print one set at a time.

•	Uncollated	All of the pages are printed one after the other. For ex-
		ample, if you make five sets of prints, each page is
		printed in sequence five copies at a time.
•	Collated	Prints are output one set at a time. For example, if you
		make five sets of prints of a 10-page document, the
		prints will be output one set at a time.

(5)Sorting

Select the sorting method.

•	Unsorted	Prints are not sorted.
•	Sorted	Prints are sorted.

(6)Orientation

Select the orientation of the image. You can check the selected direction using Page Layout.

•	Portrait	Printing takes place lengthwise.
•	Landscape	Printing takes place crosswise.

✎

Note for (1)

Depending on environment used, contents of Save/Delete will be dif- ferent: Refer to Appendix A (p. 12-11) for details.

✎

Notes for (2)

If you select a size of paper not loaded in the machine or Manual Feed, the machine will give a message prompting you to add paper to Tray1, Tray2, or the manual bypass port and enter into a standby state.

If the setting made in Original Document Size does not match the size specified in the application with Fit to Paper selected, the ma- chine takes the paper size set in the application.

Fit to Paper cannot be selected if Custom Paper is selected in Orig- inal Document Size.

✎

Note for (3)

When using the OHP interleaving function, set the number of sets of prints to 1.

✎

Note for (4)

Keep Collate (Sort) on the application side set to “OFF” at all times.

Properties Settings Chapter 4

Pi4700e 4-17