Minolta PI4700E user manual Finishing Settings

Print options

Finishing Settings

6

The Finishing Settings property sheet allows you to set finishing capa- bilities, including sort, staple, punch, and folding, for those occasions when you need to make multiple complete sets of the original document.

(1)

(2)

(3)

(4)

(1)OutputBins <only when Mailbin Finisher is mounted>

Select the machine exit tray into which the prints are to be fed.

Available options are limited by the type of finishing option configured with the ma- chine.

Setting range: Auto, Bin1 to Bin5

(2)Staple <only when Multi-staple Finisher, Single-staple Finisher, Mailbin Finisher or Folding finisher is mounted>

Select whether to staple each copy set of the document.

•	Off	Does not staple the printed pages.
•	Corner	Staples together each copy set at its corner.
•	Short Edge	<only when Multi-staple Finisher or Folding Finisher is
		mounted> Stapled along the short edge of the docu-
		ment.
•	Long Edge	<only when Multi-staple Finisher or Folding Finisher is
		mounted> Stapled along the long edge of the docu-
		ment.
•	Center	<only when Folding Finisher is mounted> Stapled at
		the center of the document.

(3)Punch <only when Multi-staple Finisher, Mailbin Finisher or Folding Finisher is mounted>

Select whether to punch holes in the printed pages.

•	Off	Does not punch holes.
•	Short Edge	Punches holes along the short edge of the document.
•	Long Edge	Punches holes along the long edge of the document.

(4)Folding <only when Folding Finisher is mounted> Set the folding functions for finishing.

•	Off	Does not fold the printed page.
•	Crease	Makes a crease in the printed page.

Printer Driver for Macintosh Chapter 6

Pi4700e 6-37