Minolta PI4700E user manual Outline, Getting ready

Outline 8

8 Network Interface Card

8.1Outline

The following shows the general outline of this chapter.

“Getting ready”

“Setting up the network card”

Read the section that covers your particular network environment.

“Windows configuration”

“NetWare configuration”

“Macintosh configuration”

Refer to these sections as required.

“Using the utility software”

Read the following sections when necessary.

“Troubleshooting”

“Jumper switch setting”

“Specifications”

8.2Getting ready

This Network Card is a multi-protocol network card that provides Ethernet connection for the Minolta Pi4700e printer controller and offers the follow- ing features.

Automatic Ethernet type detection (10BaseT, 100BaseT)

Fully transparent AppleTalk printing support for the Macintosh, includ- ing support for binary PostScript printing.

Peer-to-peer printing program allows printing on a network without go- ing through a server

❍Peer-to-Peer Printing with TCP/IP (Windows 95/98/Me/NT 4.0)

❍Peer-to-Peer Printing with IPX/SPX (Windows 95/98/Me)

Novell NetWare PSERVER support under bindery base or Novell Di- rectory Services (NDS)

lpr/lpd functions under TCP/IP

SNMP control using MIB-II and private MIB

SNMP support using standard MIB on a compatible printer or printer- specific MIB

Network Interface Card Chapter 8

Pi4700e 8-1