Minolta PI4700E user manual NIManage for AppleTalk Macintosh, Using NIManage, Zone, Device

8

Network Interface Card Chapter 8

Using the utility software

NIManage for AppleTalk (Macintosh)

This program lets you change Network Card settings on a Macintosh. It provides the following functions.

Modification of printer name and zone name using AppleTalk

Enabling and disabling of status page output

Error log referencing

Enabling and disabling of other protocols, along with display of TCP/ IP address, subnet mask, and default gateway address (all of which can be changed)

Operating System: Macintosh System 7.5.3 to 9.x, except Mac OS X

Using NIManage

1On the computer you want to use, copy AppleTalk NIManage Utility Program to the folder you want.

❍AppleTalk NIManage Utility Program is located in the APPLTLK folder on the CD-ROM.

2Double-click the AppleTalk NIManage Utility Program to start up the program and display the screen shown below.

❍Zone

shows the names of the zones on the network.

❍Device

shows the Network Cards available in each zone.

Note

The Device display panel is blank if there are no zones on the network.

3On the Zone display panel, select a zone name.

8-34 Pi4700e