Minolta PI4700E user manual Functions of the Detail of Output Setting dialog box

Setup tab

Functions of the Detail of Output Setting dialog box

4

Settings can be made for finishing functions including stapling, hole punching, and folding.

(1) (3)

(2)

(1)Staple <when Mailbin Finisher, Single-staple Finisher, Multi-staple Finisher or Fold- ing Finisher is installed>

This function allows you to staple one set of printed documents at a time.

•	Off	Printed documents are not stapled.
•	Corner staple	Printed documents are stapled at their corners.
•	Long Edge	<when Multi-staple Finisher or Folding Finisher is in-
		stalled>
		The documents are stapled along the long edge.
•	Short edge	<when Multi-staple Finisher or Folding Finisher is in-
		stalled>
		The documents are stapled along the short edge.
•	Center	<when Folding Finisher is installed>
		The documents are stapled at the center.

(2)Punch <when Mailbin Finisher, Multi-staple Finisher or Folding Finisher is installed> This function allows you to punch holes in the printed document.

•	Off	The document is not punched.
•	Short Edge	The document is punched along the short edge.
•	Long Edge	The document is punched along the long edge
•	Punch Holes	Set the number of holes to be punched.
	<Inch area only>

(3)Folding <when Folding Finisher is installed> Select the desired paper folding function.

• Off Printed pages are not folded.

•Just Output Size [Z- Printed pages are folded into three parts. Fold]

•	Half Folding	Printed pages are folded in two at their center.
•	Crease	A crease is made in printed pages.

Properties Settings Chapter 4

Pi4700e 4-13