Minolta PI4700E user manual Setting Up Notification

8

Network Interface Card Chapter 8

Using the utility software

✎

Note

Deleting a queue from the list does not physically delete the object from the file server. You must use the NetWare utility to physically de- lete the queue from the queue list.

Create Queue

The following explains the meaning of each field.

❍Queue Name

Type in the name of the new queue. You must input a queue name here whenever creating a new field. This field accepts input of up to 48 characters.

❍File Server Volume

Specifies the volume for creation of a queue. This field is enabled only when the current connection is an NDS connection, and lists all avail- able volumes. In the case of a bindery services volume, the default vol- ume name is SYS.

❍NDS Context

Specifies the NDS context for creation of a queue. This field is enabled only when the current connection is an NDS connection. The initial de- fault for this field is the NDS context specified by the Add Queue dialog box. Changing the contents of this field displays a confirmation mes- sage asking whether a check should be performed to determine whether the new context exists in the directory tree. Click the OK but- ton to start the check.

Setting Up Notification

The Notify Settings dialog box appears whenever you double-click an item listed in the Users/Groups Notified by Printer field on the Print Server dialog box. Use this dialog box to define users and groups to re- ceive notifications.

✎

Note

The Network Card supports notification in bindery mode only.

The following explains the fields on this dialog box.

User/Group name

Specifies the name of the user or group whose notification settings are

being edited. You cannot change the content of this field.

8-44 Pi4700e