Minolta PI4700E user manual Menu Items IP Parameters, LPD Printers, Protocols, Reset Unit

Appendix Chapter 12

12 Using Telnet to Make Settings

6.Change Password E. Exit

5Input the number of the menu item you want check, set, or change, and then press Enter .

Menu Items

IP Parameters

Select this menu item to change the Network Card IP address, subnet mask, default gateway, and base port number. Whenever the Network Card detects that IP parameters have been changed, it automatically starts a soft reset.

Note

The base port number is a number that is one less than the actual TCP/IP port number used by the printer. To set a port number of 10001, for example, you would specify 10000 as the base port num- ber.

The Telnet connection is cut when a soft reset is performed. Because of this, you should make other settings first and leave IP parameter settings until later.

LPD Printers

Select this menu item to specify the emulation (printer interpreter lan- guage) supported by the printer. Changing this setting lets you make changes so lpd can print for other emulations.

Protocols

Select this menu item to specify the emulation (printer interpreter lan- guage) supported by the printer. You can also disable NetWare or Apple- Talk.

Reset Unit

Select this menu item to reset the Network Card. Note that resetting the Network Card initializes the network interface without effecting the printer interface.

12-62 Pi4700e