Minolta PI4700E user manual Portrait or Landscape print appears on the Page Layout

5

Printer Driver for Linux Chapter 5

Properties settings

✎

Note for (1)

If you select a size of paper not loaded in the machine or Manual Feed, the machine will give a message prompting you to add paper to Tray1, Tray2, or Manual Feed and enter into a standby state.

✎

Note for (2)

When using the OHP interleaving function, set the number of sets of prints to 1.

✎ Note for (3)

Keep Collate (Sort) on the application side set to OFF at all times. ✎

Tip for (4)

If you exit prints to the Elevator Tray when the Single-staple Finisher, Multi-staple Finisher or Mailbin Finisher is installed, the prints are ex- ited in a sawtooth manner.

When the Folding Finisher is installed or if none of the finishing options is installed, the prints are exited in a criss-cross manner.

The following are the minimum requirements for permitting criss-cross sorting using the Collated setting.

Stacks of paper of the same size are loaded in the lengthwise and crosswise directions.

The Staple, Punch or Cover mode is not set.

✎

Tip for (5)

A Portrait or Landscape print appears on the Page Layout.

5-32 Pi4700e