Minolta PI4700E user manual OHP Interleaving, Front Cover

Print options 6

• Half Folding + Staple		Folds printed pages in two and staples them together.
• Half Folding + Punch		Folds printed pages in two and punches holes in them.
•	Half Folding + Staple,	Folds printed pages in two, staples them together, and
	Punch	punches holes in them.
•	Z-folding	Folds printed pages into three parts.

•Z-folding + Corner Sta- Folds printed pages into three parts and staples them

	ple	at the corner.
•	Z-folding + Long Edge	Folds printed pages into three parts and staples them
	Staple	together.
•	Z-folding + Punch	Folds printed pages into three parts and punches holes
		in them.

•Z-folding + Corner Sta- Folds printed pages into three parts, staples them at

ple, Punch	the corner, and punches holes in them.
• Z-folding + Long Edge	Folds printed pages into three parts, staples them to-
Staple, Punch	gether, and punches holes in them.

(11)OHP Interleaving

Select whether to insert a sheet of paper between sheets of OHP transparencies on which prints have been made.

•	Off	Does not perform OHP Interleaving.
•	Tray1 to Tray4, LCC,	Specify the paper source for the interleaves.
	LCT

(12)Front Cover Page

Lets you use paper for the cover of a different type (such as colored paper) from that for the text pages of your copy sets.

•	Off	Feeds paper for all pages of your copy sets from the
		paper source specified in Paper Source.
•	Manual Feed, Tray1 to	Specify the paper source for the cover.
	Tray4, LCC, LCT

Note for (8)

If the Folding function is to be used, turn Off Staple and make the Sta- ple setting under Folding.

If Staple is set, printed pages are fed out into the Elevator Tray.

The stapling position may be at the upper left or upper right corner de- pending on the orientation of the paper and printing.

If the number of sheets of paper exceeds the limit that the Multi-staple Finisher, Single-staple Finisher or Mailbin Finisher can handle, the stapling function may be canceled. For details, see the machine User Manual.

If the original document for a print job contains a page of a different size from the others and this document is printed, the Staple setting may be canceled.

If the original document for a print job contains a page with a different orientation from the others, care should be used because the stapling position is determined according to the direction of the first page.

It is possible that an option cannot be selected because of the paper size. For details, see the User Manual of the machine.

Printer Driver for Macintosh Chapter 6

Pi4700e 6-29