Minolta PI4700E Functions of the Detail of Paper Source dialog box, Cover, Interleaving Paper

Setup tab

Functions of the Detail of Paper Source dialog box

4

This function sets the cover page function and the OHP interleaving func- tion.

(1) (2)

(1)Cover Page

This function is used to print a document with front and back cover pages. You can print on the front cover, or leave it blank.

•	Front Cover Page	Activates the front cover function.
• with Image (Front Cover		Prints on the front cover.
	Page)
•	Back Cover Page	Adds a back cover.
• with Image (Back Cover		Prints on the back cover.
	Page)
•	Cover Paper Source	Select the tray for the front cover and back cover pa-
		pers.
		Available settings: Manual Feed, Tray1 to Tray4, LCC,
		LCT

(2)Interleaving Paper

This function inserts sheets (interleaving sheets) between sheets of OHP film when printing on OHP film. You can either leave these sheets blank or print the same image as that printed on the OHP film.

•	OHP Interleaving	Activates the OHP interleaving function.
•	with Image	Prints an image on the interleaving sheet.
•	Interleaving Paper	Select the tray for the interleaving paper.
	Source	Available settings: Tray1 toTray4, LCC, LCT

Properties Settings Chapter 4

Notes for (1)

When using special paper, such as thick paper, the paper sometimes fails to be distributed to the selected paper exit destination.

You can set Manual Feed, Tray1 to Tray4, LCC and LCT using Paper Source.

Pi4700e 4-11