Minolta PI4700E user manual Setup tab, Lcc, Lct

Properties settings

Setup tab

5

This tab allows you to set the paper take-up tray, paper exit tray and var- ious high grade printing functions.

(1) (3)

(4)

(2)

(1)Paper Source

Selects the machine tray to be used.

Sets the cover page function and the OHP interleaving function.

• Paper Source	Select the machine tray to be used.
	The selectable paper sizes are limited by the types of
	paper take-up trays installed in the machine.
	Available settings: Auto, Manual Feed, Tray1 to 4,
	LCC, LCT
• Detail of Paper Source	Set the cover page function and OHP interleaving func-
	tion. For details, see page 5-26.

(2)Output Setting

This function selects the tray in the machine to which the paper is to be exited. Settings can also be made for finishing functions including stapling, hole punching, and folding.

• Paper exit destination	Select the machine tray to which you wish to exit the
	prints.
	The selectable paper exit trays are limited by the type
	of finisher installed in the machine.
	Mailbin Finisher: Auto, Mailbin
	Excepting Mailbin Finisher: Auto

•Mailbin paper exit desti- If Mailbin is selected as the paper exit destination, set

nation	the mailbin to which you wish to exit the paper.
• Detail of Output Setting	Set stapling, punching or folding. For details, see
	page 5-28.

(3)Duplex <when Dup + 2way Tray, Dup + LCC or Duplex Cabinet is installed> Specifies two-sided printing.

• Off Not set

Printer Driver for Linux Chapter 5

Pi4700e 5-23