Minolta PI4700E user manual Next, initialize the printer. Type the following commands

Appendix Chapter 12

12 UNIX Configuration

✎

Note

<print serve name> must be the same as the one recorded in /etc/ hosts. Optional arguments inserted between the 10001 entry and be- fore the trailing 0 are ${banner}, ${user_name}, ${request_ID}, and ${files}. For details, see the System V Release 4 System Administra- tion Manual.

7 Save the file and quit the editor.

8 You need to use lpadmin to configure the host printer. Type the follow- ing:

lpadmin -p <printer name> -v /dev/null -i /usr/nic/port1_interface

✎

Note

lpadmin configures the printer name and associates it with a given de- vice and printer interface program. There is no /etc/printcap file in- volved with this method of configuration.

9 Next, initialize the printer. Type the following commands:

accept <printer name>	Enter
enable <printer name>	Enter
✎

Note

After each entry, lpadmin acknowledges the invoked command.

10 Next, type the following command:

lp -d<printer name> /etc/hosts Enter

11 Check for output or type the following:

lpstat <printer name>

Or:

lpstat -t

12-48 Pi4700e