Minolta PI4700E user manual Introduction, Using the printing functions

Introduction

3

3 Network Settings

3.1Introduction

Though this Network Card does not support NetBEUI protocol, it supports TCP/IP and IPX/SPX, which provides plenty of connection flexibility for the Windows computer.

This chapter consists of the sections listed below.

(1)Specifying the IP address from the printer’s touch panel

Note

In order to specify the IP address in a TCP/IP environment, the BootP and Map Utility are used in addition to entering the address from the printer’s touch panel. For details, refer to “8.7 Using the utility soft- ware” on page 8-28.

(2)Using the printing functions

Windows 95/98/Me

Peer-to-peer printing with TCP/IP

See “3.3 Peer-to-Peer Printing with TCP/IP” on page 3-5.

Peer-to-peer printing with IPX/SPX

See “3.5 Peer-to-Peer Printing with IPX/SPX” on page 3-12.

Windows NT 4.0

Peer-to-peer printing with TCP/IP

See “3.3 Peer-to-Peer Printing with TCP/IP” on page 3-5.

LPR printing

See “3.7 LPR Printing” on page 3-17.

Windows 2000/XP

LPR printing

See “3.7 LPR Printing” on page 3-17.

IPP printing

See “3.8 IPP Printing” on page 3-21.

(3) Specifying network settings from PageScope Light

Network Settings Chapter 3

Pi4700e 3-1