Minolta PI4700E user manual Network Settings Chapter

3

Network Settings Chapter 3

Specifying network settings from PageScope Light

Note

Use only IP parameters that have been specified or approved by your network administrator.

The network interface card does not send DHCP requests when DHCP is disabled. If there is no IP address assigned to the network interface card or if IP Address in NVRAM is turned off, the network interface card sends a BOOTP request.

A DHCP request is sent when the network interface card is reset or powered up (while DHCP is enabled and no IP address assigned to the network interface card or if IP Address in NVRAM is turned off).

When DHCP is enabled, an IP address is assigned to the network in- terface card, and IP Address in NVRAM is turned on, the network in- terface card uses the IP address stored in NVRAM. In this case, the network interface card does not send a DHCP request.

In a DHCP environment, it is necessary to specify an unlimited lease period for the IP address assigned to the network interface card or the IP address must be reset a fixed address within a range that is not leased.

3-26 Pi4700e