Minolta PI4700E user manual Ldap Setting

9

Scanner Mode Chapter 9

Network Setting

LDAP Setting

LDAP Function	Use this setting to turn LDAP search on or off.
	The setting you make here does not go into effect until you turn
	the copier off and then back on again.
	The initial default setting is OFF.
LDAP Server Address	Input the LDAP server address.
	The initial default setting is blank.
	Only an IP address can be typed in.
Port Number	Enter the LDAP server port number.
	The initial default setting is 389.
Search Root	Input the search start point.
	The initial default setting is blank.
Search Timeout(s)	Input a timeout value (seconds) for LDAP communication.
	The initial default setting is 60 seconds.
Max hit of Number	Input a value that specifies the maximum number of hits that
	can be accepted for LDAP search results.
	The initial default setting is 100.
Anonymous Login	Selecting this check box enables configuration of anonymous
	login settings.
	If the Anonymous Login check box is selected, Login Name
	and Password become unavailable.
Login Name(Dn)	Input the user name.
Password	Input the password.
Check LDAP settings	Click this button to check whether the server can be accessed
	(logged into) using the currently configured settings.
	If the server is accessed but the settings are incorrect, an error
	appears.
	Refer to the “Error List” on page 11-6.

9-10 Pi4700e