Minolta PI4700E user manual DEC Ultrix 4.3 RISC, OSF1/ALPHA, Type Input Data Description

Appendix Chapter 12

12 UNIX Configuration

DEC ULTRIX 4.3 RISC, OSF1/ALPHA

Use the following procedure to set up a remote printer on the host that sends jobs to a Network Card.

1At the prompt, type: lprsetup

2Select add.

3Type a printer name and then press Enter .

4When the following message appears, press Enter .

“Do you want more information on specific printer types?”

5This displays a list of printers supported by ULTRIX. Type the follow- ing:

remote Enter

6 Type the printer synonym (alias) and then press Enter .

7Specify the spooler directory and then press Enter .

If you want to use the default spooler directory shown on the screen, press Enter without inputting anything.

8Specify the remote system name and then press Enter .

9Type an appropriate name (like PORT1) for the remote system printer, and then press Enter .

10From the list that appears on the display, select the printcap symbol name. Next, type the following.

Q Enter

11This displays the configuration. If it is correct, type Y. If something is wrong, type N.

The following table shows some sample settings.

Item	Type	Input Data Description
lp (line printer)	STR
rm (remote host)	STR	Network Card host name
rp (remote printer)	STR	PORT1 (You can use any name you want
		here.)
sd (spooler directory)	STR	/usr/spool/lpd7

12-36 Pi4700e