8

Network Interface Card Chapter 8

NetWare configuration

6Select the printer driver for each client operating system.

When users install this printer, these drivers will be automatically downloaded to their workstations.

If the driver you need is not listed, rather than adding the driver to the RMS, you can choose None from the top of each list. Users will then be asked to provide a disk with the appropriate driver the first time they install this printer on their workstations.

7Click Continue.

The new Printer Agent will now appear in the Printer Agent List win- dow.

Converting Public-Access Printers to Controlled-Access Printers

To take full advantage of the security and management features provided by NDS, you may want to convert public-access printers to controlled-ac- cess printers.

For example, if you have used a third-party gateway to get a printer up and running immediately (plug-and-print), the gateway automatically creates a public-access printer. Later, you may want to convert that printer to a con- trolled-access printer. The following procedure explains how to convert a public-access printer to controlled-access.

Prerequisites

To create a controlled-access printer on your network, you must meet the following prerequisites:

Have at least Read, Write, Modify, and Create privileges for the desti- nation container where its associated Printer object will reside

Be designated as a manager of the NDPS Manager that will control this Printer Agent

Have a Broker running

Have an NDPS Manager object

Have a public-access printer created

1In NetWare Administrator, select the container where you want the printer to reside.

2Choose Object Create NDPS Printer.

This causes the Create NDPS Printer dialog box to appear.

3Type a name in the Printer Name field.

4In the Printer Agent Source field, select Public Access Printer.

8-24

Pi4700e

Page 255
Image 255
Minolta PI4700E user manual Printer Agent Source field, select Public Access Printer