Toshiba G7 manual Forward Speed Limit Input, Forward Speed Limit Level, Reverse Speed Limit Input

F425		F428
Forward Speed Limit Input	Direct Access Number —	F425
Program ⇒ Torque Setting Parameters ⇒ Torque Speed Limiting	Parameter Type — Selection List
This parameter Enables/Disables the Forward Speed Limit Input control	Factory Default — Disabled
	Changeable During Run — Yes
function. When enabled and operating in the Torque Control mode, the
forward speed limit is controlled by the terminal selected here. If Setting is
selected, the value set at F426 is used as the Forward Speed Limit input.
Settings:
Disabled
VI/II
RR
RX
RX2 (option)
Setting
Forward Speed Limit Level	Direct Access Number —	F426
Program ⇒ Torque Setting Parameters ⇒ Torque Control	Parameter Type — Numerical
This parameter provides a value to be used as the Forward Speed Limit setting	Factory Default — 80.0
	Changeable During Run — Yes
if Setting is selected at F425.
	Minimum — 0.00
	Maximum — Upper Limit (F012)
	Units — Hz
Reverse Speed Limit Input	Direct Access Number —	F427
Program ⇒ Torque Setting Parameters ⇒ Torque Control	Parameter Type — Selection List
This parameter Enables/Disables the Reverse Speed Limit Input control	Factory Default — Disabled
	Changeable During Run — Yes
function. When enabled and operating in the Torque Control mode, the reverse
speed limit is controlled by the terminal selected here. If Setting is selected, the
value set at F428 is used as the Reverse Speed Limit input.
Settings:
Disabled
VI/II
RR
RX
RX2 (option)
Setting
Reverse Speed Limit Level	Direct Access Number —	F428
Program ⇒ Torque Setting Parameters ⇒ Torque Control	Parameter Type — Numerical
	Factory Default — 80.0

This parameter provides a value to be used as the Reverse Speed Limit setting

if Setting is selected at F427.

Changeable During Run — Yes

Minimum — 0.00

Maximum — Upper Limit (F012)

Units — Hz

G7 ASD Operation Manual 131