Default Setting Changes
To change a default parameter setting, go to the root of the Program menu and turn the Rotary Encoder until the desired parameter group is within the cursor block and press the Rotary Encoder (repeat if there is a submenu).
Press the Rotary Encoder to select the default setting to be changed and the selection takes on the reverse video format (dark background, light text). Turn the Rotary Encoder to change the value of the parameter. Press the ESC key before accepting the change to exit the menu without saving the change or press the Rotary Encoder to accept the new setting.
For a complete listing of the Program mode menu options, see the section titled Program Mode on pg. 47. Menu items are listed and mapped for convenience. The Direct Access Numbers are listed where applicable.
The default settings may also be changed by entering the Parameter Number of the setting to be changed at the Direct Access menu (Program ⇒ Direct Access ⇒ Applicable Parameter Number). A listing of the Direct Access Numbers and a description of the associated parameter may be found in the section titled Direct Access Parameter Information on pg. 59.
A listing of all parameters that have been changed from the default setting may be viewed sequentially by accessing the Changed From Default screen (Program ⇒ Changed From Default).
Note: Parameter F201 was changed to create the example shown in Figure 20.
The Changed From Default feature allows the user to view (or change) the parameters that are different from the default or the
The Rotary Encoder may be clicked once clockwise to continue scrolling forward or clicked once counterclockwise to begin scrolling in reverse. With each click of the Rotary Encoder from a stop, the system scrolls through all of the parameters and stops at the next parameter that has been changed.
Pressing the Rotary Encoder while a changed parameter is displayed accesses the settings of the changed parameter for viewing or changing.
Pressing ESC while the system is performing a Changed From Default search terminates the search. Pressing ESC when done searching (or halted at a changed parameter) returns the system to the Program menu.
Figure 20. Changed From Default screen.
G7 ASD Operation Manual | 39 |
