G7 ASD Operation Manual 191
EOI Installation PrecautionsInstall the unit securely in a well ventilated area tha t is o ut of direc t sunl igh t using the four m ounting ho les
of the EOI. The ambient temperature rating for the EOI is 14 to 104° F (-10 to 40° C).
• Select a mounting location that i s easily accessible by the user.
• Avoid installation in areas where vibration, heat, humidity, dust, metal particle s, or high levels of
electrical noise (EMI) are present.
• Do not install the EOI where it may be exposed to flammable chemicals or gases, water, solvents, or
other fluids.
• Turn the power on only after securing the front cover to the ASD.
EOI Remote Mounting w/o the ASD-MTG-KITNote: See Figure 29 for the dimensions and the item locations referenced in steps 1 through 5.
1. At the EOI mounting location, identify and mark the location of the 3.80” by 3.29” hole and the
7/32” screw holes.
2. Cut the 3.80” by 3.29” rectangular hole.
3. Drill the four 7/32” screw holes.
4. Attach and secure the EOI to the front side of the mounting loca tion us ing the four 6- 32 x 5/ 16” pan
head screws, the #6 split lock washers, and the #6 flat washers.
5. Connect the RJ-45 extension cable(s).
EOI Dimensions (mounting)
Figure 29. EOI Mounting Dimensions.