Avaya 15-601063 manual Configuring an Analog Extension Number for Fax Use

Configuring Voicemail Pro: Fax Server Configuration

3.3.6 Configuring an Analog Extension Number for Fax Use

If the PC that is being used as the fax server uses an analog fax card, it must be connected to an IP Office analog extension (POT) port. You are then ready to configure the analog extension for fax use.

To configure an analog extension number for fax use:

1.In IP Office Manager, display the extension details for the extension that you are using for the fax.

2.View the Extn tab.

3.In the Caller Display Type field, select DTMFF.

3.View the Analogue tab.

4.Set up the incoming DDI routing of calls to specific users as required.

∙Tip

If the fax board can support multiple lines, you can configure them as a group. The group number can then be used as the fax destination instead of an individual extension number.

The next step is to set the Voicemail Pro system fax number. For more information, see Setting the Voicemail Pro System Fax Number 123 .

Voicemail Pro	Page 127
IP Office	15-601063 Issue 20l (03 March 2009)