Voicemail Pro Page 64
15-601063 Issue 20l (03 March 2009)IP Office
2.6.4 Configuring the Remote System Voicemail Settings
After you have installed the centralized Voicemail Pro, you are ready to configure the remote system settings.
To configure the remote system Voicemail settings:
1. Start IP Office Manager and receive the configuration of the remote system.
2. Set the License Server IP Address to the address of the PC acting as the remote system's Feature Key Server
PC.
·This cannot be the same PC as the central system's Feature Key Server PC.
·If the remote system does not use any licenses, enter 0.0.0.0.
3. Double-click the System icon.
4. Select the Voicemail tab and set the following:
· Set the Voicemail Type to Centralized Voicemail (was previously called Line).
· Set the Voicemail Destination to the Outgoing Group ID set on the VPN line to the central system.
5. Load the configuration and reboot the remote IP Office.
6. Dial *17 at an extension on the remote IP Office. The call should ring the Voicemail Pro server and then access the
extensions mailbox.