Voicemail Pro Actions: Miscellaneous Actions

6.8.5 Post Dial

The Post Dial action can be used to connect another extension to a specified call flow start point or to play a recording to that extension.

To add a Post Dial action:

1.Click the Miscellaneous Actions icon and select Post Dial.

2.In the Specific tab, complete the fields with relevant details.

·Post wave file

Plays a selected wav file. When Post wave file is selected there are two options which can be selected.

·Play out a looped wave file

The wav file will be played in a continuous loop.

·Delete the wave file after completion

The wav file will be deleted after it has been played.

·Post the following action

Enter the name of the required start point or use the browse button to select the start point. To play a recording, enter c:\mywavs\hello.wav (substitute the appropriate file path and file name for the .wav file you want played).

·To extension

Enter or select the extension to which the call should be made. The voicemail server will attempt to make the call every 5 minutes for the next hour until successful.

·Page Calls

The Post Dial action can be used to page a .wav file to an extension number, including group extension numbers. This is done by entering PAGE: followed by the target extension number. In this case the wav file will not loop if selected.

Connect the result Next to a relevant action.

Voicemail Pro

Page 271

IP Office

15-601063 Issue 20l (03 March 2009)

Page 271
Image 271
Avaya 15-601063 manual Post Dial