6.9.4 Test Variable

For Voicemail Pro 4.2+, the Test Variable action has been added and replaces the previous Check Digits action. It allows calls to be routed based on matching the value of a system variable to a specified value.

To add a Test Variable action:

1.Click the Conditions Actions icon and select Test Variable.

Settings

The following controls are available on the Specific tab of this action.

Select the variable to Match

This drop-down list is used to select which Voicemail Pro system variable 211 should be checked for a match. Note that with $KEY the timeout is used and additional dialing is accepted if no immediate match occurs.

Select the parameter(s) to test the variable against

Select the types of values that should be checked for a match and if necessary entry the value. If several options are selected, the Voicemail Pro check for a match starting from the top and working down until a match occurs.

Variable

Check for a match against the value of another selected system variable

Specific

Check for a match against the value entered in the adjacent field.

Extn

Check for a match against valid extensions on the IP Office.

Hunt Group

Check for a match against hunt group extension numbers.

Mailbox

Check for a match against mailboxes.

Timeout after

211.

The timeout value is used only if $KEY is selected as the variable to match. In that case, if no immediate match occurs on the existing value of $KEY, the Voicemail Pro will wait for the specified timeout period for the caller to dial a new value of $KEY.

Voicemail Pro

Page 278

IP Office

15-601063 Issue 20l (03 March 2009)

Page 278
Image 278
Avaya 15-601063 manual Test Variable