Avaya 15-601063 9.4 IP Office to Avaya Interchange

15-601063 Issue 20l (03 March 2009)IP Office

9.4 IP Office to Avaya Interchange

This section is based upon the S8100/G600 Intuity Audix. It is assumed that the IP address of the S8100 processor is

known. A browser should be available and the Avaya Terminal Emulator or the equivalent to do the necessary

configuration.

To configure the Avaya Intuity Audix:

1. Issue a telnet command to the S8100/G600, log in and enter "audix" to reach the audix command prompt.

2. Enter list configuration and verify that the TCP/IP value is set to at least 1. If not, these ports must be activated

through the license process before proceeding.

3. From a PC browser, access the S8100 processor IP address and login.

·At the S8100 main page, select Administer System > Audix Networking > Administrative Menu >

Network Channel Administration.

·Enable each channel in the Channel Configuration Column.

· Select Save when finished.

4. Return to the Audix command prompt screen. Inspect the system for the list of mailboxes that will be eligible to

receive messages.

· Type change machine. Note the range of local extensions. List subscribers will provide a more specific list.

It is best to distinguish mailboxes that are eligible to receive messages for example, call answer mailboxes.

·On page 2 of the change machine form, ensure that all the update settings are set to y.

·Make sure that Network Turnaround is set to y. Select Enter.

5. To administer the password for message exchange:

·From the S8100 home page select Administer System > Audix Networking > Administrative Menu >

Local Machine Administration.

·Enter the password to be used for transfer of messages between this system and the Avaya interchange.

Select Change.

6. To enter the information for connecting to the Interchange:

·From the S8100 home page select Administer System > Audix Networking > Administrative Menu >

Remote Machine Administration > Digital Machine Administration.

· Select Add New Machine.

·Enter the Avaya interchange name, IP address and networking password.

·Define the schedule for exchanging messages.

· Select Add to complete.

7. To administer the parameters associated with the Interchange:

·Type change machine <machine name> from the AUDIX command prompt.

·If all extensions that are not on the Intuity Audix are configured to be on the Interchange and "Send to non-

Administered Recipients" is set to yes, errant messages may be sent. This will waste bandwidth and processing

time.

·The extension Length setting is the dial plan length that has been configured in the Avaya Interchange.

·Set all the parameters of page 2 to y. (Send to non-administered recipients, Updates In, Updates Out and Network

Turnaround).

·Select F3 to Add the remote machine.