Event Reporting and U-Abort Capabilities

connected party number

For outgoing calls over PRI facilities — “connected number” — from the ISDN CONNect message, if provided by the ISDN network; otherwise the default trunk value (#####).

For incoming calls — locally connected extension (primary extension for TEGs, PCOLs, bridging).

For Single-Step Conference request — the station that was Single-Step Conferenced into the call.

call_id

This ECS-assigned call identifier is used to associate event reports to calls and identify a call the adjunct wants to control. The call identifier is unique within the ECS.

party_id

The ECS-assigned identifier that uniquely identifies a party on a call. The ECS provides the identifier and the adjunct should retain it for future operations. The party identifier is unique within the call_id.

cause

Contains the reason the report is being sent. The following cause values are valid for this event:

Normal Answer (Answer Supervision from the Network, Internal Answer) (CSO/16).

Timed Answer (Assumed Answer Based On Internal Timer) (CS3/17). Timed Answer is administered on the Trunk Group form.

Voice Energy Answer (Voice Energy Detected By Classifier) (CS3/18)

For Single-Step Conference, the newly added party has a listen-only path (no visibility) (CS3/08).

For Single-Step Conference, the newly added party has listen/talk path (full visibility) (CS3/09).

II-digits

Information Identifier (II) digits provide information about the originating line for the call. II-Digits only apply to calls that arrive on PRI trunks at the ECS.

3-38Issue 7 May 1998

Page 104
Image 104
Lucent Technologies 555-230-220 manual Connected party number, Callid