ASAI and Feature Interactions

Data Delivery/Data Restriction

If a call is established with Data Privacy, a request to add a party using Single-Step Conference will be denied. If a station in a call is administered with Data Restriction, a request to add a party to the call using Single-Step Conference will be denied.

Station Hunting

Applications using call control can follow a call around when this feature is active. Applications monitoring stations will see appropriate event reports as the call follows the hunting path.

Switch-Classified Calls

Specifying a station or group AWOH (Administered Without Hardware), as originator is not supported.

System Restarts

Reboot, COLD1, COLD2 System Restarts

-cause the BRI port board to be reset thereby disconnecting the BRI signaling channels. All ASAI associations are terminated.

System Warm Start Hot Start

-cause a layer 2 drop which can lead to the adjunct clearing associations or restarting layer 3.

Temporary Bridged Appearances

The operation of this feature has not changed with ASAI. No event is provided when a temporary bridged appearance is created at a multifunction set. If the user is connected to the call (becomes active on such an appearance), the Connected Event Report is provided. If a user goes on-hook after having been connected on such an appearance, a Disconnect/Drop Event Report with cause CS0/16 (normal clearing) is generated for the disconnected extension (bridged appearance).

If the call is dropped from the temporary bridged appearance by someone else, a Disconnect/Drop Event Report is also provided.

Temporary bridged appearances are not supported with analog sets. Analog sets get the Call Redirected Event Report when such an appearance would normally be created for a multifunction set.

Issue 7 May 1998 12-53

Page 355
Image 355
Lucent Technologies 555-230-220 Station Hunting, Switch-Classified Calls, System Restarts, Temporary Bridged Appearances