ASAI and Domain Control

Miscellaneous Restrictions (CS3/42)

The redirected-to number cannot be the same as the originating number or the redirecting number.

The call is redirecting on the first leg of a switch-classified call.

Miscellaneous Restrictions (CS3/43)

The redirected-to number is a Remote Access Extension, or the COR check fails.

The redirecting station is origination-restricted.

Miscellaneous Restrictions (CS3/63)

The redirecting number is not a station extension, the call_id does not exist, or the call is not in the alerting state or is redirecting while in vector processing.

Calls that result in intercept treatment will not be allowed to redirect even if normally such calls would be sent to an attendant.

Protocol Error (NAK) Causes

The ECS issues the following cause for generating a protocol processing error:

Protocol error (CS0/111)

The Q.932 protocol has been violated or the capability invoked is not consistent with this association. For example, invoking the Third Party Make Call capability on a Domain Control association is inconsistent.

NOTE:

For more information regarding protocol errors and a complete list of reason codes (cause values), see the DEFINITY Enterprise Communications Server CallVisor ASAI Protocol Reference, 555-230-221.

Considerations

With this service, when a call is routed to a new number, if the new number is a station on the ECS, it begins alerting (if available to receive the call) and the originally-alerted call is dropped. At this point, this alerting call is eligible to be redirected again. If the new (redirected-to) number is off-premises, the call is routed there and the caller hears call progress tones. In this case, the call may not be redirected again.

For both on and off-switch redirection, the ECS will not drop the redirecting party until success is assured. It is at this point that the positive acknowledgement is sent. If the ECS cannot redirect the call, NAK is provided and the alerting call will not be affected.

5-18Issue 7 May 1998

Page 220
Image 220
Lucent Technologies 555-230-220 manual Protocol Error NAK Causes