ASAI and Domain Control

Third Party Domain (Station) Control

Request

An adjunct uses this capability to receive event reports and control calls at a specified extension.

Information Flow

The adjunct expects a response to its request.

The ECS returns an acknowledgement to the application after the ECS verifies that the station number is valid and the maximum number of controllers for the station has not been reached.

Domain (Station) Control Request Parameters

domain

[mandatory] This parameter identifies a valid local station.

ACK (Positive Acknowledgement) Parameters

The ECS responds to the adjunct’s request with a list of call_ids, the party_id of the principal’s extension on the call, and the state of the principal’s extension on the call.

Denial (NAK) Causes

The ECS issues one of the following reasons as the cause for ending the association:

Invalid association (CS0/81) The association does not exist.

Invalid number/domain (CS0/28)

An invalid address or extension number is present in the request.

Service or Option Not Available (CS3/63)

The maximum number of Domain Control Requests are in use for the domain.

Switching Equipment Congestion (CS0/42)

The ECS is not accepting the request at this time because of processor overload. The adjunct or user may wish to retry the request but should not do so immediately.

5-6Issue 7 May 1998

Page 208
Image 208
Lucent Technologies 555-230-220 Third Party Domain Station Control Request, Domain Station Control Request Parameters