ASAI and Feature Interactions

Further, when CDR Call-Splitting changes the charging number, the original charging number will receive a charging event with charge type, ‘‘split charge.’’

Consult

When the covering user presses the Conference or Transfer feature button and receives dial tone, a Hold Event Report is returned to all adjuncts monitoring the call. A Call Initiated Event Report is then sent to the covering user on the domain-control associations monitoring the covering user. After the Consult button is pressed by the covering user, Alerting and Connected Event Reports for the principal are returned to associations monitoring the principal and covering user. The covering user can then conference or transfer the call.

Selective Listening

Conferencing is not affected by the Selective Listening feature. If a listener was third party listen-disconnected in the original call prior to the conference, then this listener will remain listen-disconnected to the talkers on the newly conferenced call.

Data Calls

Data calls cannot be originated via the Third Party Make Call or Third Party Auto Dial capabilities. Analog ports equipped with modems can be domain-controlled and calls to and from these ports can be controlled and monitored. However, Call Control capabilities may cause the call to be dropped by the modem.

Starting with R5: An implementation option does allow outgoing data calls that use charge advice trunk facilities and that generate charging information from the network to be presented to the adjunct as Charging Event Reports. No further ASAI operations on data calls that are referenced by any Charging Event Report are supported.

DCS

With respect to ASAI event reporting, calls made over a DCS network are treated as off-ECS calls and only the Call Initiated, Trunk Seized, Call Ended, and/or Disconnect/Drop Event Reports are returned. DCS/UDP extensions that are local to the ECS are treated as on-ECS stations. DCS/UDP extensions connected to the remote nodes are treated as off-ECS numbers.

ASAI does not currently support DCS calls completely. DCS calls may or may not provide accurate information to an ASAI adjunct. In a pure DCS environment, if the DCS calling party information is available to the ECS (if a station with a display gets it), this information is also made available to ASAI. Otherwise, calling party information is provided as the default (*****).

Issue 7 May 1998 12-29

Page 331
Image 331
Lucent Technologies 555-230-220 manual Data Calls, Consult