ASAI and Set Value Capabilities
Set Value
The adjunct uses this capability to set the value of the message waiting Lamp (MWL) and to set the billing rate of a
Information Flow
The adjunct expects a response to its request.
The ECS either acknowledges or denies the request.
Set Value Parameters
item | [mandatory] Specifies the item to be set. MWL and Flexible |
| Billing are the only options presently available. |
item_params | [mandatory for MWL] For MWL, the |
| extension of the party (station) for which the MWL is to be set |
call_id | [mandatory for Flexible Billing] For Flexible Billing, this |
| |
| reports and to identify a call that the adjunct wants to control. |
| The call identifier is unique within the ECS. |
billing_type | [mandatory for Flexible Billing] For Flexible Billing, one of the |
| following must be present: |
| ■ New rate: Per minute rate that starts when message is |
| set |
| ■ Flat rate: |
| ■ Premium charge: Flat charge in addition to existing rate |
| ■ Premium credit: Flat negative charge in addition to |
| existing rate |
| ■ Free call: |
amount | [mandatory for Flexible Billing] Applies to first four values of |
| billing_type (Flexible Billing); not allowed for free call. Rate of |
| call in dollars and cents. Cannot be less than $0.00 or |
| greater than $999.99. |
value | [mandatory for MWL] For MWL, either on or off. |
