ASAI and Call Routing
specific_event | [optional] This parameter indicates when the |
| tone detector used by the |
| Collection feature should be released. Options |
| are “far end answer/connect” and “party |
| disconnect.” Only the “far end answer” option is |
| currently supported (starting with Release |
| G3V3); other values are rejected. When the |
| event option is not present in the Route Select |
| and the digit collection is specified, the default is |
| “far end answer/connect.” |
number_of_digits | [optional] This parameter indicates the total |
| number of digits that will be collected (1 to 24). |
| For |
| and “*” count as one digit each. If the request is |
| not in the valid range, the Route Select fails with |
| cause CS0/79 — Service/option not available. |
digit_coll_timeout | [optional] This parameter indicates how many |
| seconds (1 to 31) the tone detector will continue |
| to collect digits after the first digit is received for |
| |
| no timeout. |
uui_info | [optional] If an ASAI adjunct provides UUI in a |
| Route Select, then the ECS stores that UUI with |
| the call. The UUI overwrites any previous UUI |
| stored with the call. |
| UUI from a Route Select will be sent in any ISDN |
| SETUP message for the call, in the Alerting and |
| Call Offered Event Reports, or in a future Route |
| Request. |
| The UUI IE sent over an ISDN trunk can contain |
| more data than the UUI IE sent to ASAI. This |
| happens when the ISDN trunk group is |
| administered with supplementary service |
| protocol other than B, and the UUI IE Treatment |
| is set to “shared”. The UUI for ASAI is packed |
| within the shared UUI before it is sent over an |
| ISDN trunk, and is unpacked at the other end. |
