Event Reporting and U-Abort Capabilities

Answered Event Report

The Answered Event Report is only sent for the destination of a switch-classified call, as follows:

When a switch-classified call is placed to an on-ECS station and the station has answered the call (picked up handset or connected after zip tone)

When a switch-classified call is placed to an off-ECS destination and an ISDN CONNect message is received from an ISDN-PRI facility

When a switch-classified call is placed to an off-ECS destination and the call classifier detects an answer, an answering machine, or a Special Information Tone (SIT) administered to answer. For specific SIT and AMD values, refer to Table 4-2on page 4-13, in Chapter 4, ‘‘ASAI and Call Control.’’

NOTE:

Only one Answered Event Report is possible for a call.

Answered Event Report Items

The following is a list of items provided with this report:

called party number

For outgoing calls over PRI facilities, the Called Number as in the SETUP message

For outgoing calls over non-PRI facilities, the called number is the default trunk value (#####)

If the extension is on the local ECS, then the extension of the destination called is passed

connected party number (answering party number)

For calls over PRI facilities — “connected number” — from the PRI CONNect message, if provided by the ISDN network; otherwise the default trunk value (#####)

For calls over non-PRI facilities — the default trunk value (#####)

For calls answered by an on-ECS extension, this is the answering extension

call_id

This ECS-assigned call identifier is used to associate event reports to calls and to identify a call the adjunct wants to control. The call identifier is unique within an ECS.

Issue 7 May 1998 3-13

Page 79
Image 79
Lucent Technologies 555-230-220 manual Answered Event Report Items, Called party number