ASAI and Feature Interactions

A Third Party Auto Dial call to a station with the SAC feature active redirects to the covering station.

For incoming calls, the Alerting Event Report is sent only for multifunction sets receiving calls while having SAC activated. The Alerting Event Report is not generated for analog sets when the SAC feature is activated and the set is receiving a call.

Direct-agent calls existing in the agent queue when this feature is activated are not sent to coverage. Only the new direct-agent calls are affected by activation of this feature.

While SAC is active at a station, agent status value queries will show that an agent is busy.

SAC is ignored for priority direct-agent call and for switch-classified call destinations.

If a SAC’ed call rings at a station with Domain Control, then the Alerting event includes a cause value indicating SAC as the reason the call redirected.

Send DTMF

If a listener is listen-disconnected while DTMF digits are being transmitted (as a result of the ASAI Send DTMF capability), the DTMF digits will still be heard by the listener.

Service Observing

Domain-controlled stations may be service-observed and may also be observers. When a domain-controlled station is the observer, and is bridged onto a call for the purpose of service observing, the Connected Event Report is sent on domain-controlled associations for the observer’s adjunct as well as to all other associations for that call.

Service Observing may not be activated or deactivated through ASAI. In addition, third party operations such as hold and drop are denied (for consistency with manual operation).

An adjunct-controlled or adjunct-monitored call can be service-observed provided that service observing is originated from a voice terminal and the service observing criteria is met. A Connected Event Report is generated every time service observing is activated for an adjunct-monitored call. A Disconnect/Drop Event Report is generated when the observer disconnects from the call.

For a switch-classified call, the observer is bridged on the connection when the call is given to the service observed party. Unlike the ACD operation, the observer

Issue 7 May 1998 12-51

Page 353
Image 353
Lucent Technologies 555-230-220 manual Send Dtmf, Service Observing