ASAI-Ethernet

Physical Connectivity for MAPD

The MAPD system assembly that provides the DEFINITY LAN Gateway brouter application is a single circuit pack [a Multi-Application Platform for DEFINITY (TN801) ] that provide a processor, a hard disk, a PCMCIA disk, an Ethernet, and serial ports. See Figure 13-3.

TN801

17 18 19 20

Figure 13-3. MAPD System Assembly in a DEFINITY ECS Carrier

The system assembly is inserted into a DEFINITY ECS carrier using three contiguous slots. Before being placed in the ECS carrier, the DEFINITY ECS can be administered using the change circuit-packs cabinet command.

Carrier Connectivity for MAPD

Starting with the DEFINITY Release 5, the system assembly is recognized as the MAPD Board, and the display circuit-packs cabinet command shows the assembly occupying the selected slots.

For example, in Figure 13-3, the MAPD Board occupies slots 18 through 20. Slot 20 should be administered as a MAPD Board (TN801), and DEFINITY ECS administration software will prevent slots 18 and 19 from being administered for other circuit packs.

Issue 7 May 1998 13-5

Page 363
Image 363
Lucent Technologies 555-230-220 manual Physical Connectivity for Mapd, Carrier Connectivity for Mapd