ASAI and Call Control | 4 |
|
This chapter describes the Call Control Capability Group.1 The capabilities in this group are categorized by their functions: initiating, controlling, and terminating. The adjunct uses these capabilities to set up (place), take control of, monitor, or end a call on DEFINITY ECS.
Third Party This initiating capability enables the adjunct to set up a call
Make Call on behalf of an
Third Party This initiating capability enables the adjunct to take control of Take Control a call that is already in progress to perform additional call
control functions when needed.
Third Party This controlling capability enables the adjunct to place the
Selective controlled call on hold at the specified station.
Hold
Third Party This controlling capability enables the adjunct to direct the
Reconnect ECS to reconnect a specified station to the controlled call.
1.Capability groups are analogous to the Application Service Elements (ASEs) described in the Adjunct/Switch Application Interface (ASAI) Specification.