ASAI and Feature Interactions
Stations AWOH do not have disconnect supervision. Therefore they cannot place calls to trunks that do not have disconnect supervision. When all the parties in a call that have disconnect supervision drop, the AWOH will also be automatically dropped. ASAI Phantom Calls cannot be originated from a BRI type AWOH station.
Analog Sets
Redirection
Analog sets do not support temporary bridged appearances. In normal circumstances, when a call at a multifunction set is left on a simulated bridge appearance, the call moves away from the analog set. Thus, any
Alerting Event Reports are not sent to
Redirection on No Answer
Calls redirected by this feature generate the following event reports when a call is redirected from a nonanswering station:
■Call Redirected Event Report:
Provided over the Third Party Domain Control associations when the call is redirected from a nonanswering agent. This event is not provided if the call is requeued to the split or delivered to another agent in the split.
■Queued Event Report:
Generated if the call queues after being redirected.
■Call Ended Event Report:
If the call cannot requeue after the call has been redirected from the nonanswering agent, then the call continues to listen to ringback until the caller is dropped. In this case, a Call Ended Event Report is generated when the caller is dropped and the call disconnected.
Auto-Answer Option
The
Manual Answer Option
Manual answer analog sets receive dial tone after receiving a Third Party Drop or Third Party Clear Call capability.