
www.ti.com
SRIO Registers
Table 43. Peripheral Settings Control Register (PER_SET_CNTL) Field Descriptions (continued)
Bit | Field | Value | Description |
3 | ENPLL4 | 0 | Not used. Should always be programmed as "0". See Section 2.3.2.1 to |
|
|
| enable SERDES PLL. |
2 | ENPLL3 | 0 | Not used. Should always be programmed as "0". See Section 2.3.2.1 to |
|
|
| enable SERDES PLL. |
1 | ENPLL2 | 0 | Not used. Should always be programmed as "0". See Section 2.3.2.1 to |
|
|
| enable SERDES PLL. |
0 | ENPLL1 | 0 | Not used. Should always be programmed as "0". See Section 2.3.2.1 to |
|
|
| enable SERDES PLL. |
SPRUE13A | Serial RapidIO (SRIO) | 115 |
Submit Documentation Feedback |
|
|