Sony 8000SF, MVS8000 manual 100

Keyer copy and keyer swap

You can carry out copy and swap operations among the 16 keyers listed in the following table.

Target bank	Target keyer	Target data
M/E-1	Keys 1 to 4	Key settings excluding the following data
M/E-2		items:
M/E-3		•	Setup data
		•	Key snapshots
PGM/PST	Downstream keys 1 to 4
		•	Key memory

Note

If a DME is being used on the source keyer for a copy or either keyer for a swap, then if for example there are insufficient DME channels, or the limit on using DME channels within an M/E bank is exceeded, it may not be possible to select the DME.

Wipe copy and wipe swap

You can copy and swap the wipe settings among the banks listed in the following table.

Target bank	Target data
M/E-1	Wipe settings.
M/E-2	It is not, however, possible to carry out copy or swap involving
M/E-3	independent key transition wipe settings.
PGM/PST

Wipe copy and wipe swap in the independent key transition control block

You can copy and swap the wipe settings among the 16 keyers listed in the following table.

Target bank	Target keyer	Target data
M/E-1	Keys 1 to 4	Wipe settings in the independent key
M/E-2		transition control block.
M/E-3		It is not, however, possible to copy or
		swap wipe settings to or from an external
PGM/PST	Downstream keys 1 to 4
		downstream keyer.

DME wipe copy and DME wipe swap

You can copy and swap the DME wipe settings among the banks listed in the following table.

Functions 8000-MVS 1 Chapter

Copy and Swap 99