Wipes 5 Chapter

•To set the modifiers for the main pattern, in the M/E-1 >Wipe menu, select HF5 ‘Main Modify,’ and make the settings in the Main Modify menu.

•To set the modifiers for the sub pattern, select HF6 ‘Sub Modify,’ and make

the settings in the Sub Modify menu.

Operations in the Main Modify menu and Sub Modify menu are the same.

Independently set modifiers for the main pattern and sub pattern

•Positioner

•Rotation

•Aspect ratio

•Pattern replication (MULTI)

•Pairing

•Modulation

•Spring

•Spiral

The following sections show examples of modifying the main pattern.

Specifying the wipe direction (Direction)

You can specify the wipe direction (normal/reverse).

To specify the wipe direction in a menu

1 In the M/E-1 >Wipe menu, select HF4 ‘Edge/Direction.’

The Edge/Direction menu appears.

2 In the <Direction> group, specify the wipe direction.

Normal: regular direction

Normal/Reverse: alternate between regular and reverse for each transition

Reverse: reverse direction to normal

To specify the wipe direction with a button in the transition control block

In the transition control block of each of the M/E-1 to M/E-3 and PGM/PST banks, press the following direction selection buttons.

NORM: Normal

NORM/REV: Normal/reverse

REV: Reverse

Splitting the wipe pattern

1 In the M/E-1 >Wipe menu, select HF4 ‘Edge/Direction.’

The Edge/Direction menu appears.

444 Basic Procedure for Wipe Settings