Meaning of the state of buttons
Off: Nothing is saved in the register.
Lit orange: Settings are saved in the register.
Lit yellow: The most recently recalled register.
Canceling the saving of a wipe snapshot
To cancel the saving of a wipe snapshot immediately after performing it, hold down the [STORE STATS] button, and press the [UNDO] button. The [STORE STATS] button changes from amber to green.
Note
On a simple type Flexi Pad control block, it is not possible to cancel the saving of a wipe snapshot.
Recalling a wipe snapshot
1 In the Flexi Pad control block, press the [WIPE] button.
This switches the Flexi Pad control block to the mode for recalling a wipe snapshot.
2 Press the memory recall button for the register from which you want to recall the wipe snapshot.
The button lights, and the saved wipe snapshot is recalled. At this point, the numeric display shows the pattern number or register name.
Canceling the recall of a wipe snapshot
To cancel the recall of a wipe snapshot, press the [UNDO] button.
Deleting a wipe snapshot
When the [WIPE] button is lit in the Flexi Pad control block, hold down the [STORE STATS] button and press the memory recall button for the register in which you want to delete the wipe snapshot.
The indication of the memory recall button reverts from the wipe pattern or register name to the register number.
Note
In a simple type Flexi Pad control block, it is not possible to delete a wipe snapshot.
462 Wipe Snapshots