Example 1: When the independent key transition [AUTO TRANS] button is pressed later

Common transition

Independent key

The transition

(wipe) start

transition (mix)

completes with the

 

start

key deleted.

Example 2: When the common transition [AUTO TRANS] button is pressed later

Independent

Common

The transition

key transition

transition (wipe)

completes with the

(mix) start

start

key deleted.

Time offset execution with the key not inserted

Transition Types

Selecting the transition type determines the way in which the transition occurs. Carry out the type selection with the transition type selection buttons in the transition control block of each M/E or PGM/PST bank.

For details of this operation, see “Basic Operating Procedure” (page 340).

The following are the transition types.

Mix

This is a dissolve, in which the new video progressively fades in over the current video, with the sum of the two video outputs maintained constant. At the mid-point of the transition (when the fader lever is in the center position), the output of each is 50%.

This transition type can also be selected for an independent key transition. In this case, the key either dissolves in or dissolves out similarly, with the progress of the transition.

Transitions 41