2 In the frame memory selection area, select the FM to be assigned. (See page 495.)
3
4 Press a button in the frame memory folder selection area, to select the folder to hold the freeze image.
For details of the selection method, see page 496.
Note
The folder selected here is the destination folder for writing the freeze image.
It is not possible to change the selection of this folder after the following step 5.
An orange bar appears on the selection button for the destination folder.
5 Press [Edit Enable], turning it on.
The signals of frame memory source buses 1 and 2 are assigned to the pair of FMs selected in step 2, and the combining of the background signal (the signal providing the background for combination) and the input signal (the signal providing the foreground for combination) is now possible.
Note
The input signal is lowered by one line, but when you apply a freeze, the freeze image is returned to the correct position.
6 To use a color matte signal for the input signal, press [Frgd Color], turning it on.
Even when pair mode is enabled, you can make separate settings for each FM.
7 Turn the knobs to adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0.00 to 100.00 |
|
|
|
|
2 | Saturation | Saturation | 0.00 to 100.00 |
|
|
|
|
3 | Hue | Hue | 359.99 to 0.00 |
|
|
|
|
8 If you turned [Frgd Color] off in step 6, if required press [Input Adjust] to display the Input Adjust menu, and make the video process (see page 498) and mask (see page 499) settings for the input signal.
Still Image Operations 503