2 Holding down the [PRIOR SET] button, press the one of the next transition selection buttons [KEY1] to [KEY4] ([DSK1] to [DSK4] buttons in the PGM/PST bank) for the key to appear on top.
The selected key now appears on top, on the program monitor.
The priority of keys other than the selected one does not change.
Key 1 selected.
Key priority: 3, 1, 4, 2 | Key priority: 1, 3, 4, 2 |
To change the priority of more than one key, repeat this operation as required.
Changing the key priority for after the transition
When executing a transition, turning on the next transition selection button [KEY PRIOR] causes the keys to be rearranged based on the set priority. To set the key priority for after the transition, use the following procedure.
1 In the transition control block, hold down the [PRIOR SET] button and press the [KEY PRIOR] button to turn it on. Do not release the [PRIOR SET] button before advancing to step 2.
The [KEY PRIOR] button lights green, and it becomes possible to change the key priority setting for after the transition.
2 Hold down the [PRIOR SET] button, and press the one of the next transition selection buttons [KEY1] to [KEY4] ([DSK1] to [DSK4] buttons in the PGM/PST bank) for the key you want to bring to the front after the transition.
To set the priority to be the same as before the transition, press the [BKGD] button.
Note
The [BKGD] button is only effective when in the mode for changing the key priority for after the transition.
344 Key Priority Setting