Wipes 5 Chapter

a) See page 65.

To move the pattern from its current position to the center through the course of a transition

Press [Auto Center] in the <Position> group, turning it on.

Rotating the wipe pattern (Rotation)

1 In the <Rotation> group of the Key1 Wipe Adjust menu, select the rotation type.

Angle: Incline the pattern through a fixed angle.

Speed: Rotate at a speed rate.

Magnitude: Rotate the pattern through a fixed angle during the course of the transition.

2 According to the selection in step 1, set the following parameters.

• When Angle is selected

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Angle

Angle of pattern rotation

–100.00 to +100.00 a)

a) See page 66.

• When Speed is selected

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Speed

Rotation rate of pattern

–100.00 to +100.00 a)

a) See page 66.

• When Magnitude is selected

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Angle

Angle of pattern rotation at start of

–100.00 to +100.00 a)

 

 

transition

 

 

 

 

 

2

Magnitude

Angle of rotation through course

–200.00 to +200.00 a)

 

 

of transition

 

 

 

 

 

a) See page 67.

 

 

Setting the wipe pattern aspect ratio (Aspect ratio)

1 Press [Aspect] in the Key1 Wipe Adjust menu, turning it on.

2 Set the following parameter.

458 Wipe Settings for Independent Key Transitions