1 In the M/E 1 >DME Wipe menu, select HF5 ‘Modify’.
The Modify menu appears.
2 In the <Crop Mode> group select [Remove From Begin].
The Remove From Begin menu appears.
3 In the <Release Transition> group, select the timing of transition completion.
Last30%: The transition completes at the end of 70% of the transition execution time. The transition has a dead zone from 70% to 95% of the transition time.
Last5%: The transition completes at the end of 95% of the transition execution time. When the transition completes, the cropping is removed during the last 5%.
Off: The transition completes at the end of the transition execution time. During the last 5% of the transition, the transition and cropping removal proceed together.
|
|
|
| Transition |
|
|
| Transition |
|
|
| Transition | ||
|
|
|
|
|
| |||||||||
|
|
|
| Cropping |
|
|
| Cropping |
|
|
| Cropping | ||
| y | y | y | |||||||||||
(%) |
|
|
| “Dead Zone” | (%) |
|
|
| (%) |
|
|
|
| |
100 |
|
|
|
|
| 100 |
|
|
| 100 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| 95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
0 |
|
| t | 0 |
|
| t | 0 |
|
| t |
|
|
|
|
|
| ||||||
70 95 100 (%) |
| 70 95 100 (%) |
| 95 | 100 (%) | ||||||
| [Last 30%] |
|
| [Last 5%] |
|
| [Off] |
|
| ||
t: transition execution time
y: change in transition and cropping amount
DME Wipe Modify Clear
Press [Default Recall] at the lower left of the menu display, turning it on, then press VF6 ‘DME Wipe’ to return the DME wipe settings to their initial status.
For details of menu operations, see “Menu Operations” (page 323).
476 Basic Procedure for DME Wipe Settings