Note
This function is only supported on the
2 Press [Frame Delay], setting it to On.
Note
This function uses the resizer, and therefore the expected result of the setting may not be obtained if conditions do not allow the resizer to be used.
Carrying out a color mix for the key edge fill matte
When you select ‘Matte’ for the edge fill of a border, drop border, or shadow, you can create a combination of color 1 and color 2 using a wipe pattern generated by the dedicated pattern generator.
1 In the <Edge Fill> group of the Edge menu, select [Matte], then press [Matte Adjust].
The edge fill Matte Adjust menu appears.
2 In the <Edge Matte> group, select [Mix Color], turning it on. 3 Adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Size | Pattern size | 0.00 to 100.00 |
|
|
|
|
2 | Soft | Softness of pattern edge | 0.00 to 100.00 |
|
|
|
|
3 | Pattern | Pattern number | 1 to 24 a) |
a)The patterns are the same as standard wipes. (For details, see “Wipe Pattern List” in Appendix (Volume 1) (page 560).)
To select the pattern, display the Mix Pattern Select menu by pressing [Mix Pattern] in the edge fill Matte Adjust menu. After selecting one of the patterns (standard wipe patterns 1 to 24) displayed in the Mix Pattern Select menu, you can adjust the following parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Size | Pattern size | 0.00 to 100.00 |
|
|
|
|
2 | Soft | Softness of pattern edge | 0.00 to 100.00 |
|
|
|
|
4 Adjust color 1 and color 2.
394 Key Setting Operations Using Menus