•A processed key cannot be used. Therefore, it is not possible to apply a DME effect to a downstream key.
•As an independent key transition type, wipe and DME wipe cannot be used.
•The resizer cannot be used.
•The key frame delay mode cannot be used.
Restrictions on executing transitions in the transition control block
•DME wipes cannot be used.
•Wipes can be used, but there are restrictions on use. For details, see the next item, “Restrictions when using wipes.”
Restrictions when using wipes
•The wipe patterns that can be used are standard wipes (pattern numbers 1 to 24) only.
•A pattern mix cannot be used.
•A split (splitting the wipe pattern) cannot be used.
•When a border or soft border is selected for a wipe edge, the signal to be inserted in the edge (edge fill) is restricted as follows.
– The utility 2 bus cannot be selected.
– When using a matte, a mix color cannot be used.
– Even if the wipe border width is set to the same numeric value for M/E and Simple P/P, the same image is not obtained.
•The following wipe modifiers cannot be used:
– Replication “Shift” and Multi Adjust menu adjustments
– Pairing
– Modulation
– Spring
– Spiral
•Changing modifier parameter settings changes the wipe pattern size.
Restrictions on utility buses
The utility 1 and utility 2 buses cannot be used.
Assignment of signals to output connectors
Connectors to which the P/P row output signal assignment is fixed The assignment of the following signals to output connectors OUT17 to OUT22 is fixed.
228 Simple P/P Software