Functions 8000-MVS 1 Chapter

As for the bus number of the utility 3 bus, a DME Key bus number is used as follows.

No.

Bus (Standard)

Bus (MP2)

 

 

 

70

M/E-1 DME Key

M/E-1 Utility3

 

 

 

85

M/E-2 DME Key

M/E-2 Utility3

 

 

 

100

M/E-3 DME Key

M/E-3 Utility3

 

 

 

115

P/P DME Key

P/P Utility3

 

 

 

Making settings for timeline-related keyframe operations

To assign sub regions to the region selection buttons in the numeric keypad control block

In the Engineering Setup >Panel >Config >10 Key Region Assign menu, assign regions to the region selection buttons in the numeric keypad control block.

For details, see “Overall Control Panel Settings (Config Menu)” in Chapter 16 (Volume 2).

To make region and reference region selections using a menu During snapshot or keyframe operations, you can select a region (including sub) in the Key Frame >Region Select menu. This is convenient for selecting some of the regions assigned to the numeric keypad control block or changing the reference region.

For details, see “Specifying the Region and Edit Points” in Chapter 13 (Volume 2).

To assign regions shown in the Timeline menu

You can select how regions assigned to region selection buttons appear in the Key Frame >Timeline menu.

For details, see “Setting the display of regions in the Timeline menu on or off” in Chapter 13 (Volume 2).

Enabling re-entry between the main and sub sides of the same M/E bank

In the Engineering Setup >Panel >Config menu, set [MP2 Free Re-Entry] to On.

Notes

•Re-entry adds a 1H delay to the video. Nested re-entry may lead to problems in the video.

240 Multi Program 2