Cross-point button settings (Xpt Assign)

•Xpt Assign: For each control block or bus, display and set the assignments to the main table and tables 1 to 14. You can also carry out settings to link switcher signal selection to the audio mixer.

•Main, V/K Pair Assign: Make cross-point settings for the main table.

–Assign video/key sources for button numbers 1 to 128.

–For each table, specify whether the rightmost cross-point button in each row is used as a shift button, and the operation mode when it is used as a shift button.

–For the [SHIFT] button in the cross-point control block and for each table, select the mode in which this is a shift button dedicated to the source name displays, or the mode in which it is a shift button for all buses.

–Disable cross-point buttons to work.

•Mixer Xpt Assign: Assign audio mixer cross-points to cross-point buttons in the main table.

•Table Button Assign: Create tables 1 to 14 in the same way as the main table.

•Src Name: Set source names of up to 16 characters.

•LCD Color: Set the LCD color for source name display.

•Table Copy: Copy table contents from the main table to tables 1 to 14 or between tables 1 to 14 (it is not possible to copy tables 1 to 14 to the main table).

•Name Export: This function sends the source name and destination name to the S-Bus.

•Side Flags Button Assign: Assign the rightmost button in the background A/B row to the side flag function (inserting a selected image on both sides of a 4:3 image).

Auxiliary bus control block settings (Aux Assign)

•Aux Assign: Assign the AUX delegation buttons in the auxiliary bus control block to any bus.

•Shift Mode: Specify whether the rightmost button of the AUX delegation buttons is used as a shift button, and when it is used as a shift button, the operation mode.

•RTR Mode Setting: Carry out the following settings for using the auxiliary bus control block for router control.

–Assigning destinations

–Setting the shift operation in the destination selection button rows

–Source table settings

–Setting the shift operation in the source selection button rows

–Assigning levels to the level selection buttons

–Setting destination selection buttons to be used for snapshots

196 Setup